Introduction to Dust Collection
 |
 |
 |
 |
 |
 |
 |
 |
 |
The Dust Collection System
An important addition to workshops and machines is a dust collection system.
Dust collection systems make shops cleaner, safer, and extend the life of a
machine. A clean shop is a safe shop. Uncontrolled dust can cause potentially
serious health risks, contribute to messy work environment that can cause
personal injury, and be the cause of premature machine failures.
Sawdust, wood chips, and any other particles generated by cutting the wood,
particle board, plywood, etc., become hazardous if they are inhaled. These
products are created with the use of resins, alkaloids, silica, tannins, toxic
organic and inorganic elements. Not to mention the insecticides,
formaldehydes, and other toxins that come in contact with the tree in nature.
Exposure to dust containing any of these can cause respiratory ailments, allergic
reactions, skin problems, and liver, kidney, or blood diseases. Keep in mind, the
finer dust particles can be easily inhaled and ultimately end up within the
bloodstream. These are the realities as pertaining to proper dust collection in the
modern workshop.
Designing the Proper Dust Collection System
In order to design a cost-effective and efficient dust collection system, the
ducting must be carefully planned. The simpler the system, the cheaper and
more efficient it will be. Before getting started, there are many variables which
should be considered, such as: type of dust collector, type of ducting material,
location, layout, and the budget for your system.
Dust Collectors
There are basically two types of dust collectors: single- stage, and two-stage. A
single-stage unit is an inherently cheaper system which consists of an inline
impeller which passes debris through the impeller and deposits the dust and
debris into a filter bag. As dust and debris collects in the bag or drum, the system
becomes increasingly less efficient. Precautions need to be taken with single-
stage systems to prevent large objects, or any objects that can cause sparks when
passing through the impeller. Objects that are too large can cause damage to
the impeller, thus resulting in impaired performance. Objects that cause sparking
exponentially increase the chance of a fire or dust explosion. A good dust
separator should be installed so that it will trap metal objects before they reach
the impeller. If you suspect a spark was generated, the unit should be shut down
immediately and the bag emptied into a safe airtight container. Two-stage units
draw dust and debris into the system, but deposit the majority of the debris in the
first stage collection container before entering the impeller. At this point, only
fine dust passes through the impeller. As this fine dust passes through the
impeller, the second stage consists of a fine micron filter element which filters
the fine dust as the air is exhausted from the dust collector back into the shop..
Choosing Piping
There are two types of piping to choose from: metal or plastic. There are several
different types of metal ducting such as stove, heat, and ventilation piping, as
well as piping designed specifically for dust collection systems. Metal piping is
generally more expensive, but has many advantages over plastic piping. One
advantage of using metal piping is the fact that it is a conductor and does not
contribute to static electrical charge build-up. Although suspended dust within
the ducting still generates a static electrical charge, metal piping is a conductor
that can be easily grounded, dissipating the charge. If metal piping is to be used
for the system, it should be of 26 gauge material or heavier so that the ducting
will not collapse from the vacuum. The ideal ducting is piping that is
specifically designed for dust collection purposes because it is the most
efficient; however, this is the most expensive. The use of metal piping does make
installation more difficult, and may not be airtight if it is not specifically
designed for dust collection. All leaks should be sealed for optimum
performance.
Plastic piping, such as PVC or ABS, is the least expensive, readily available and
easily assembled, but it has many inherent problems. Plastic piping is an
insulator; thus static electricity is generated as dust particles travel through the
ducting. It is very important to ground a plastic ducting system in order to
dissipate the static electrical charge. This can be accomplished by running bare
16 AWG copper grounding wire, which should be stranded, braided and run
inside the entire ducting system (braided antenna wire works well too). At any
joints, the wire should be soldered so that there is a smooth transition at the joint.
This smooth transition will help prevent debris from getting trapped, thus
clogging the system. In addition, this braided wire should be spiral-wrapped
around the exterior and grounded as well.
Below is an example of proper dust collection pipe:
Both metal and plastic piping require final connection to the machines. This
connection should be made with flexible hose, not rigid piping. The use of flex
hose will allow movement of the machine without damaging the ducting system.
Metal piping typically connects easily to flex hose whereas plastic usually does
not always mate correctly. A common method for this connection is to wrap duct
tape around the plastic fitting increasing the diameter, or fabricate a wooden
donut so that the connection can mate correctly. When using the flexible hose,
try to minimize the lengths, because its deeply corrugated surface can increase
static pressure loss by as much as 50% over smooth-walled piping.
Location of Dust Collector
The location of the dust collector is very important because it will affect the over
all efficiency and cost of the system. When deciding the location of the dust
collector, do not consider installing it in a room that has any ignition source. In
addition, keep in mind that if installing outside the shop area in a small room,
the air removed from the shop must be exhausted so that there won’t be a
pressure differential causing the dust collector efficiency to drop.
An important addition to workshops and machines is a dust collection system.
Dust collection systems make shops cleaner, safer, and extend the life of a
machine. A clean shop is a safe shop. Uncontrolled dust can cause potentially
serious health risks, contribute to messy work environment that can cause
personal injury, and be the cause of premature machine failures.
Sawdust, wood chips, and any other particles generated by cutting the wood,
particle board, plywood, etc., become hazardous if they are inhaled. These
products are created with the use of resins, alkaloids, silica, tannins, toxic
organic and inorganic elements. Not to mention the insecticides,
formaldehydes, and other toxins that come in contact with the tree in nature.
Exposure to dust containing any of these can cause respiratory ailments, allergic
reactions, skin problems, and liver, kidney, or blood diseases. Keep in mind, the
finer dust particles can be easily inhaled and ultimately end up within the
bloodstream. These are the realities as pertaining to proper dust collection in the
modern workshop.
Designing the Proper Dust Collection System
In order to design a cost-effective and efficient dust collection system, the
ducting must be carefully planned. The simpler the system, the cheaper and
more efficient it will be. Before getting started, there are many variables which
should be considered, such as: type of dust collector, type of ducting material,
location, layout, and the budget for your system.
Dust Collectors
There are basically two types of dust collectors: single- stage, and two-stage. A
single-stage unit is an inherently cheaper system which consists of an inline
impeller which passes debris through the impeller and deposits the dust and
debris into a filter bag. As dust and debris collects in the bag or drum, the system
becomes increasingly less efficient. Precautions need to be taken with single-
stage systems to prevent large objects, or any objects that can cause sparks when
passing through the impeller. Objects that are too large can cause damage to
the impeller, thus resulting in impaired performance. Objects that cause sparking
exponentially increase the chance of a fire or dust explosion. A good dust
separator should be installed so that it will trap metal objects before they reach
the impeller. If you suspect a spark was generated, the unit should be shut down
immediately and the bag emptied into a safe airtight container. Two-stage units
draw dust and debris into the system, but deposit the majority of the debris in the
first stage collection container before entering the impeller. At this point, only
fine dust passes through the impeller. As this fine dust passes through the
impeller, the second stage consists of a fine micron filter element which filters
the fine dust as the air is exhausted from the dust collector back into the shop..
Choosing Piping
There are two types of piping to choose from: metal or plastic. There are several
different types of metal ducting such as stove, heat, and ventilation piping, as
well as piping designed specifically for dust collection systems. Metal piping is
generally more expensive, but has many advantages over plastic piping. One
advantage of using metal piping is the fact that it is a conductor and does not
contribute to static electrical charge build-up. Although suspended dust within
the ducting still generates a static electrical charge, metal piping is a conductor
that can be easily grounded, dissipating the charge. If metal piping is to be used
for the system, it should be of 26 gauge material or heavier so that the ducting
will not collapse from the vacuum. The ideal ducting is piping that is
specifically designed for dust collection purposes because it is the most
efficient; however, this is the most expensive. The use of metal piping does make
installation more difficult, and may not be airtight if it is not specifically
designed for dust collection. All leaks should be sealed for optimum
performance.
Plastic piping, such as PVC or ABS, is the least expensive, readily available and
easily assembled, but it has many inherent problems. Plastic piping is an
insulator; thus static electricity is generated as dust particles travel through the
ducting. It is very important to ground a plastic ducting system in order to
dissipate the static electrical charge. This can be accomplished by running bare
16 AWG copper grounding wire, which should be stranded, braided and run
inside the entire ducting system (braided antenna wire works well too). At any
joints, the wire should be soldered so that there is a smooth transition at the joint.
This smooth transition will help prevent debris from getting trapped, thus
clogging the system. In addition, this braided wire should be spiral-wrapped
around the exterior and grounded as well.
Below is an example of proper dust collection pipe:
Both metal and plastic piping require final connection to the machines. This
connection should be made with flexible hose, not rigid piping. The use of flex
hose will allow movement of the machine without damaging the ducting system.
Metal piping typically connects easily to flex hose whereas plastic usually does
not always mate correctly. A common method for this connection is to wrap duct
tape around the plastic fitting increasing the diameter, or fabricate a wooden
donut so that the connection can mate correctly. When using the flexible hose,
try to minimize the lengths, because its deeply corrugated surface can increase
static pressure loss by as much as 50% over smooth-walled piping.
Location of Dust Collector
The location of the dust collector is very important because it will affect the over
all efficiency and cost of the system. When deciding the location of the dust
collector, do not consider installing it in a room that has any ignition source. In
addition, keep in mind that if installing outside the shop area in a small room,
the air removed from the shop must be exhausted so that there won’t be a
pressure differential causing the dust collector efficiency to drop.
| Industry Links |
